Tyre Filling and Repairing

It helps to know the steps involved in tyre filling and repairing, given how flat tyres are a real problem. Almost every car owner has faced a punctured tyre once in their lifetime or is about to experience them in future. Various factors can contribute to a flat tyre including a glass piece, a small nail or any other sharp object. If you own tubeless car tyres, then driving through such lanes filled with such objects will only lead to severe car rim damage and cause various accidents.

Instead of spending time and investing the energy in taking your car to the mechanic store, how about knowing how to fill the tyres and repair them by yourself?

Steps Involved in Tyre Filling and Repairing

Inflating tyres on your own and fixing them thereafter is a much more feasible option than finding a mechanic’s store in the middle of a highway, past midnight. Here are some of the ways of addressing tyre filling and repairing.

Look Out for the Leak

To begin with, you would have to search for the tyre leak. It might be a difficult task to find the object which has caused the flat tyre in the first place. The object can either be a nail or even a sharp item. Look at your car tyres closely and check for holes and cuts. If visible inspection isn’t helping, you can use the best digital gauges for car to check how much pressure your car is left with. 

Inflate the tyres accordingly. While inflating, keep a lookout for a hissing sound. But if you are failing at puncture detection all the time, try combining dish soap and water in a spray bottle to apply it to the tyre. You would find the formation of bubbles from the tyre leakage. You can then use tape to spot the leakage.

Connect the Tyre Puncture Repair Kit

  • You would have to squeeze the sealant into your car’s tyre with the help of its adapter. To start using most of the car flat tyre repair kits. You might be required to get rid of the tyre valve to complete this action. However, you can always adhere to the vehicle handbook or repair kit manufacturer’s guidelines for this. 
  • Once you have squeezed all the sealant into the tyre, just go ahead and connect the compressor with the tyre valve. 
  • After attaching the compressor, plug it into the 12V power source in your car.
  • Slightly roll your car to ensure even spreading of the sealant across the whole tyre.
  • Some sealant kits available in car gadgets stores will come with an extra adapter. This adapter will let you accommodate the sealant bottle inside the compressor. This way you can pump the car sealant inside the tyre via the compressor.

Make Use of the Flat Repair Kit Properly

  • The norms for using a flat tyre repair kit are the same in both front car tyres and rear tyres. Take advantage of the smoothening tool along with the pliers set to extract the nail or any other object from the tyre. Be mindful of disposing of the same safely.
  • Following this, you would use the smoothening tool for smoothening out the tiny hole created by the sharp object. You would have to perform tool insertion and extraction several times to ensure the hole is big enough to fit a rubber strip for clogging them.
  • Once you achieve a bigger hole, you have to put the rubber strip inside. Avoid taking out the smoothening tool and rather keep it inside the hole. Use a complete strip to put it inside the strip insertion equipment. If you have taken out your car tyres, then tightly hold them between your legs. Put the stripping tool inside, while removing the smoothening tool simultaneously. Pull out completely after waiting for a few seconds.

Time to Inflate Your Car Tyres

For the final step, you would have to inflate the tyre with appropriate air pressure to ensure seamless car movement on the road. Thereafter, you would have to re-install the tyres, get rid of the floor jack and tighten the lugs after attaching them to the right torque. 


Read Also: Best Information Steering Wheel Cleaners For Your Car

What to Keep in Mind Before Filling Flat Tyres and Repairing Them?

Nothing can beat the happiness of being able to repair a flat or punctured car tyre. However, there are a few things to keep in mind before attempting a repair on your car wheels, know what they are.

Inspect the Treads

Every car tyre has an average lifespan of 4 years which can vary according to how many miles you drove so far and the damages it withstood. Repairing such old tyres is never an option and rather risky, given how it can result in pressurized wheel explosions. Avoid such mishaps by patching previously patched car tyres and instead look for tyre tread before you perform a repair.

Never Perform Patching on A Patch 

If your car tyres have experienced puncture before, then avoid patching the patched spot at all costs. You must never attempt a repair on an already patched tyre as it can trigger risky consequences later on like harming the tyre’s integrity and blowouts during driving. 

Now that you know about tyre filling and repairing, you can easily perform the entire thing without any professional assistance. You can even use some water to make sure that there isn’t any leakage in the hole that you just clogged. Invest in the right tyre inflator to inflate your tyres at times of emergencies or when they lack the required air. 

Leave a Reply

Your email address will not be published. Required fields are marked *